News

Renewable Energy High Voltage Services

Tuesday, May 29th, 2018

Renewable Energy High Voltage Services
11kV | 33kV | 132kV

Renewable Energy High Voltage Services

Renewable Energy High Voltage Services – Tristan Jones, Sales & Marketing Manager and David Demock, HV Engineering Manager for C&P recently attended the Dogger Bank Offshore wind project exhibition at Hardwick Hall, Sedgefield. C&P’s high voltage division specialises in high voltage wind power and renewable energy infrastructure.

Renewable Energy Onshore Projects

We offer full turnkey design and build balance of plant services (inc civils) up to 132kV for onshore renewable energy projects and also asset operation and maintenance services.

Offshore Wind Power

For Offshore Wind Power we are able to support the operation and maintenance of assets and provide jointing services up to 66kV and are certified with GWO certification.

For further information about C&P’s High Voltage and other Integrated Electrical Services, please click on one of the links below:



Offshore Wind HV Engineers

Monday, April 23rd, 2018

Offshore Wind HV Engineers – C&P Engineering Services certified to work on offshore wind farms

Offshore Wind HV Engineers

Offshore Wind HV Engineers…

Offshore Wind HV Engineers – Six High Voltage Electrical employees from C&P Engineering Services have successfully completed the GWO (Global Wind Organisation) accredited offshore wind health and safety survival training course. The completion of the globally recognised training will enable C&P Engineering Services to increase its operations within the offshore renewable energy industry. (more…)



30MW Standby Generation Site

Monday, April 16th, 2018

30MW Standby Generation Site

30MW Standby Generation Site

C&P has begun the construction phase of a 20MW standby generation site in Avonmouth, which will then be expected to extend to a capacity of 30MW. Ten Finning CAT gas powered standby generators have been installed at the site, each weighing 40 tonnes and with a capacity of 2MW. (more…)



Thorne & Derrick International

Thursday, February 15th, 2018

Supplier Showcase

Thorne & Derrick International

Thorne & Derrick International

LV, MV & HV Cable Jointing, Substation & Electrical Eqpt Suppliers

Thorne & Derrick International are specialist distributors of LV, MV & HV Cable Installation, Jointing, Duct Sealing, Substation & Electrical Equipment – servicing UK and global businesses involved in cable installations, cable jointing, substation, overhead line and electrical construction at LV, 11kV, 33kV and EHV.

Product CategoriesDuct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder PillarsCable Joints LV | Joints & Terminations MV HV 

You can visit their HV Cables & Jointing POWER Blog for more information

Nexans Euromold

T&D are UK Approved Distributors for Nexans Euromold Connectors

 



High Voltage Services in Bahrain

Tuesday, February 13th, 2018

High Voltage Service in Bahrain – Commissioning Project

High Voltage Services in Bahrain

High Voltage Services in Bahrain: C&P Engineering Services’ High Voltage division were tasked with completing a commissioning project for a customer in Bahrain on their 11kV High Voltage distribution network. (more…)



New Windfarm Energisation

Wednesday, January 24th, 2018

Windfarm Energisation

New Windfarm Energisation for 3 Turbine 6MW Site

New Windfarm Energisation – C&P Engineering Services’ high voltage division has recently completed the successful energisation of a 6MW, 3 Turbine Windfarm in Tredegar, South Wales for Windfarm developers, REG Power Management. REG Power Management is a developer, owner and operator of renewable energy projects and has built and developed over 1000MW of operational wind and solar projects, both in the UK and internationally. (more…)



Short Term Operating Reserve

Monday, January 8th, 2018

C&P Awarded Contract for 30MW STOR Gas Generation Facility

Short Term Operating Reserve

Short Term Operating Reserve – Balancing Supply and Demand to the Grid

C&P Engineering Services are delighted to announce that is has been awarded the design and build contract by Enersyst Limited (part of the Walters Group of Companies) for a STOR (Short Term Operating Reserve) 30MW Gas Generation Facility, located off Smoke Lane in Avonmouth, Bristol. (more…)



Pen Bryn Oer Windfarm

Tuesday, August 15th, 2017

Pen Bryn Oer Windfarm – HV Design & Build Services

This project is a high voltage electrical design and build contract that C&P Engineering Services have been awarded by REG WindPower for the Pen Bryn Oer Wind Farm. The site is situated between Rhymney and Tredegar and comprises of 3 off Vesta V90 2MW Wind Turbines, generating 6 MW in total.

Construction Phase 2 – Major HV Electrical Plant & Equipment Installation

C&P have begun the high voltage construction on site and have started the second phase of the Pen Bryn Oer Windfarm project.  On Monday 14th August 2017, major plant and equipment was delivered to site to begin the installation of an Ormazabal Velatia CGM.3 33kV 630A Busbar Switchgear and a 50kVA Auxiliary Transformer. (more…)



Save Energy…Add £££’s to your bottom line

Wednesday, August 2nd, 2017

LOW LOSS TRANSFORMERS: REDUCING ENERGY BILLS, OPERATING COST AND ENVIRONMENTAL IMPACT

Low Loss Transformers can significantly create financial savings by optimising your voltage management and improving the energy efficiency and resilience of your site (more…)



C&P Awarded HV Electrical Contract for New Wind Farm

Monday, April 10th, 2017

HV Renewable Energy Maintenance

Awarded Design & Build Contract for Pen Bryn Oer Wind Farm

Wind Farm – C&P Engineering Services are delighted to announce that it has been awarded the high voltage electrical design and build contract by REG WindPower for the Pen Bryn Oer Wind Farm, situated between Rhymney and Tredegar. The site will comprise of the 3 off Vesta V90 2MW Wind Turbines, generating 6 MW in total. (more…)